DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD

Professional LED maker from China Over 10 years of LED production experiences Sufficent supply,entirely quality assured

Manufacturer from China
Site Member
8 Years
Home / Products / Infrared Emitting Diode /

5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle

China 5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle wholesale
  • China 5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle wholesale
  • China 5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle wholesale

5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle

Ask Latest Price
Brand Name :Double Light
Model Number :DL-503IRTA-2IR45
Certification :ISO9001:2008/ROHS
Place of Origin :China (mainland)
MOQ :1000pcs/pack
Payment Terms :Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability :15,000,000pcs per Day
Delivery Time :10-15 working days after received your payment
Packaging Details :Dimensions per Unit:0.28 × 0.2 × 0.13 Meters • Weight per Unit:3.5 Kilograms • Units per Export Carton:40000 • Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters • Export Carton Weight:14.2 Kilograms
Price :Negotiated
Product Name :5mm Round 940nm Infrared LED
Package :Standard T-1 3/4 diameter package
Forward Voltage @20ma :0.8-1.8V
Viewing Angle :45Deg
Forward Current :100mA
Peak Emission Wavelength :940nm
Package type :Through Hole
Power :100mW
Contact Now

Add to Cart

Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
View Product Description

5mm Round Standard T-1 3/4 Type Infrared Blue Transparent Emitting Diode Led

Features:

  1. Standard T-1 3/4 diameter package.
  2. Low forward voltage.
  3. Viewing angle=45°.
  4. Reliable and rugged.
  5. The product itself will remain within RoHS complaint Version.

Descriptions:

The device is spectrally matched with silicon photodiode and phototransistor.

Applications:

  1. Floppy disk drive.
  2. Optoelectronic switch.
  3. Camera.
  4. Free air transmission system.
  5. Video.

Bin Code TesTest Condition

Part No. Chip Material Lens Color Source Color

DL-503IRTA-2IR45

GaAlAs

Blue Transparent

Infrared

Notes:

  1. All dimensions are in millimeters (inches).
  2. Tolerance is ± 0.25 mm (.010″) unless otherwise specified.
  3. Protruded resin under flange is 1.00 mm (.039″) max.
  4. Specifications are subject to change without notice.

Package Dimension:




Absolute Maximum Ratings at Ta=25

Parameters Symbol Max. Unit
Power Dissipation PD 100 mW

Peak Forward Current

(1/10 Duty Cycle, 0.1ms Pulse Width)

IFP 1.00 A
Forward Current IF 100 mA
Reverse Voltage VR 5 V
Operating Temperature Range Topr -40℃ to +80℃
Storage Temperature Range Tstg -40℃ to +85℃
Soldering Temperature Tsld 260℃ for 5 Seconds

Electrical Optical Characteristics at Ta=25℃

Parameters Symbol Min. Typ. Max. Unit Test Condition
Radiant Intensity (Note 1) * Ee 5.5 9.0 --- mW/sr IF=20mA
--- 22.0 --- IF=100mA, tp=100µs, tp/T=0.01
Viewing Angle (Note 2) * 2θ1/2 --- 45 --- Deg IF=20mA
Peak Emission Wavelength λp --- 940 --- nm IF=20mA (Note 3)
Spectral Bandwidth △λ --- 50 --- nm IF=20mA
Forward Voltage VF 0.80 1.20 1.50 V IF=20mA
--- 1.60 1.80 IF=100mA, tp=100µs, tp/T=0.01
Reverse Current IR --- --- 10 µA VR=5V

Notes:

  1. Luminous (Radiant) Intensity Measurement allowance is ± 10%.
  2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
  3. The dominant wavelength (λp) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Typical Electrical / Optical Characteristics Curves(25 Ambient Temperature Unless Otherwise Noted)


Please read the following notes before using the product:

1. Over-current-proof

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

2. Repairing

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90% RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70% RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

3. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

4. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Company Introduction

HongKong Double Light Electronics Technology Co. Ltd was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.

Please contact with me to help you find your right product and get your best price.

China 5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle for sale

5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle

Inquiry Cart 0