logo-s Products | Suppliers | 登录 | 注册 | 外贸论坛
HongKong Double Light Electronics Technology Co. Ltd
Professional LED maker from China Over 10 years of LED production experiences Sufficent supply,entirely quality assured
Verified Supplier

5 Years

Home > Products > Bi Color LED >

Hyper Red AlGaInP Bi Color LED 5mm Lamp Indicator 75mW

HongKong Double Light Electronics Technology Co. Ltd

City: shenzhen

Province/State:guangdong

Country/Region:china

Contact Person:MrRony Qiu View Contact Details

Hyper Red AlGaInP Bi Color LED 5mm Lamp Indicator 75mW

Brand Name : Double Light

Model Number : DL-509SRPGCA-C

Certification : RoHS/ REACH

Place of Origin : China

MOQ : 1,000pcs/bag

Price : US$ 0.025-0.03per unit (Pieces)

Payment Terms : Telegraphic Transfer in Advance (Advance TT, T/T)

Supply Ability : 2,000,000pcs per day

Product Name : 5mm Standard T-1 3/4 Type Bi-Color Hyper Red & Green LEDs

Package : 5mm Standard T-1 3/4 Type DIP LED

Emitted Color : Hyper Red & Pure Green

Product number : DL-509SRPGCA-C

Color Temperature : Red: 624nm, Green: 520nm

Forward Voltage @20ma : Red:1.8-2.8V, Green:2.8-3.6V

Contact Now


This is our 5mm Standard T-1 3/4 Type Bi-Color Hyper Red & Green LEDs, the 5mm Bi-Color series contain two integral chips and is available bicolor, the colors can do as you need.

Part No. Chip Material Lens Color Source Color
DL-509SRPGCA-A R AlGaInP Water Clear Hyper Red
G GaP Green

Notes:

  • All dimensions are in millimeters (inches).
  • Tolerance is ± 0.25mm (.010″) unless otherwise noted.
  • Protruded resin under flange is 1.00mm (.039″) max.

Specifications are subject to change without notice.

Features:

  • 5mm standard T-1 3/4 type.
  • Bi-color: Hyper Red & Pure Green.
  • Uniform light output.
  • Low power consumption.
  • I.C. Compatible.
  • Long life-solid state reliability.
  • The product itself will remain within RoHS compliant Version.

Descriptions:

  • The lamp contain two integral chips and is available bicolor.
  • The Hyper Red and Yellow Green light is emitted by diodes of AlGaInP and GaP respectively.
  • White Diffused lens color.

Applications:

  • TV set.
  • Monitor.
  • Telephone.
  • Computer.
  • Circuit board, etc.

Absolute Maximum Ratings at Ta=25℃

Parameters Symbol Max. Unit
Power Dissipation Hyper Red PD 60 mW
Yellow Green 75

Peak Forward Current

(1/10 Duty Cycle, 0.1ms Pulse Width)

IFP 100 mA
Forward Current Hyper Red IF 25 mA
Yellow Green IF 25 mA
Reverse Voltage VR 5 V

Electrostatic Discharge

(HBM)

Hyper Red ESD 2000 V
Yellow Green 2000
Operating Temperature Range Topr -40℃ to +85℃
Storage Temperature Range Tstg -40℃ to +100℃

Lead Soldering Temperature

[4mm (.157″) From Body]

Tsld 260℃ for 5 Seconds

Electrical Optical Characteristics at Ta=25℃

Parameters Symbol Emitting Color Min. Typ. Max. Unit Test Condition
Luminous Intensity * IV Hyper Red 400 500 --- mcd

IF=20mA

(Note 1)

Green 2000 3000 ---
Viewing Angle * 1/2 Hyper Red --- 60 --- Deg

IF=20mA

(Note 2)

Green --- 60 ---
Peak Emission Wavelength λp Hyper Red --- 632 --- nm IF=20mA
Green --- 525 ---
Dominant Wavelength λd Hyper Red --- 624 --- nm

IF=20mA

(Note 3)

Green --- 520 ---
Spectral Line Half-Width △λ Hyper Red --- 20 --- nm IF=20mA
Green --- 15 ---
Forward Voltage VF Hyper Red 1.80 2.20 2.80 V IF=20mA
Green 2.80 2.20 3.60
Reverse Current IR Hyper Red --- --- 10 µA VR=5V
Green --- --- 10

Notes:

  • Luminous Intensity Measurement allowance is ± 10%.
  • θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
  • The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Typical Electrical / Optical Characteristics Curves

(25℃ Ambient Temperature Unless Otherwise Noted)

Reliability Test Items And Conditions:

The reliability of products shall be satisfied with items listed below:

Confidence level: 90%. LTPD: 10%.

1) Test Items and Results:

Test Item Standard Test Method Test Conditions Note Number of Damaged
Resistance to Soldering Heat

JEITA ED-4701

300 302

Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb 1 time 0/100
Solder ability

JEITA ED-4701

300 303

Tsld=235±5℃, 5sec

(using flux)

1time

over 95%

0/100
Thermal Shock

JEITA ED-4701

300 307

0℃~100℃ 15sec, 15sec 100 cycles 0/100
Temperature Cycle

JEITA ED-4701

100 105

-40℃~25℃~100℃~25℃ 30min,5min,30min,5min 100 cycles 0/100
Moisture Resistance Cycle

JEITA ED-4701

200 203

25℃~65℃~-10℃ 90%RH 24hrs/1cycle 10 cycles 0/100
High Temperature Storage

JEITA ED-4701

200 201

Ta=100℃ 1000hrs 0/100

Terminal Strength

(Pull test)

JEITA ED-4701

400 401

Load 10N (1kgf)

10±1sec

No noticeable damage 0/100
Terminal Strength (bending test)

JEITA ED-4701

400 401

Load 5N (0.5kgf)

0°~90°~0° bend 2 times

No noticeable damage 0/100
Temperature Humidity Storage

JEITA ED-4701

100 103

Ta=60℃, RH=90% 1000hrs 0/100
Low Temperature Storage

JEITA ED-4701

200 202

Ta=-40℃ 1000hrs 0/100
Steady State Operating Life Ta=25℃, IF=30mA 1000hrs 0/100
Steady State Operating Life of High Humidity Heat Ta=60℃, RH=90%, IF=30mA 500hrs 0/100
Steady State Operating Life of Low Temperature Ta=-30℃, IF=20mA 1000hrs 0/100

2) Criteria for Judging the Damage:

Item Symbol Test Conditions Criteria for Judgment
Min. Max.
Forward Voltage VF IF=20mA --- F.V.*)×1.1
Reverse Current IR VR=5V --- F.V.*)×2.0
Luminous Intensity IV IF=20mA F.V.*)×0.7 ---

*) F.V.: First Value.

Please read the following notes before using the product:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

3. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

4. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

5. Caution in ESD

Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.


Product Tags:

Hyper Red Bi Color LED

      

AlGaInP Bi Color LED

      

75mW Dual Color Led

      
China Hyper Red AlGaInP Bi Color LED 5mm Lamp Indicator 75mW wholesale

Hyper Red AlGaInP Bi Color LED 5mm Lamp Indicator 75mW Images

Send your message to this supplier
From:
Enter your email please.
To: HongKong Double Light Electronics Technology Co. Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0