Datasheet:DL-TOP5050W40W65-2W120.pdf light source: Warm White & White
DL-TOP5050RGBW.pdf light source:Red Green Blue & White
DL-TOP5050RGBC-XY.pdf light source:RGB
DL-TOP5050RGBC-WS2812B.pdf light source:RGB+ flash
DL-TOP5050UYC-4UY.pdf light source: Single color
| 1.60mm Height 2220 Package Top View White & White Chip LED |
This is our 1.60mm Height 2220 Package Top View 5050 White & White Chip LED(Two Chips).
Features:
- Package in 12mm tape on 7" diameter reels.
- Industry standard footprint.
- Low profile.
- Small size (L×W×H: 5.40mm×5.00mm×1.60mm).
- Super luminosity white LED.
- Several colors available.
- Built in 3 LED chips.
- Wide viewing angle.
- Soldering methods: Reflow Soldering.
- High performance.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The 5050 Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications. etc.
Applications:
- Automotive: Backlight in dashboards and switches.
- Telecommunication: Indicator and backlight in telephone and fax.
- Indicator and backlight for audio and video equipment.
- Indicator and backlight in office and family equipment.
- Flat backlight for LCD’s, switches and symbols.
- Light pipe application.
- General use.
| Part No. | Chip Material | Lens Color | Source Color |
| DL-TOP5050W40W45-2W120 | InGaN | Yellow Diffused | Warm White |
| White |
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10mm (.004") unless otherwise specified.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max | Unit |
| Power Dissipation(Per Chip) | PD | 150 | mW |
| Peak Forward Current(Per Chip) (1/10 Duty Cycle, 0.1ms Pulse Width) | IFP | 120 | mA |
| Continuous Forward Current(Per Chip) | IF | 100 | mA |
| Reverse Voltage(Per Chip) | VR | 5 | V |
| Electrostatic Discharge (HBM) | ESD | 1000 | V |
| Operating Temperature Range | Topr | -40℃ to +80℃ |
| Storage Temperature Range | Tstg | -40℃ to +85℃ |
| Soldering Temperature | Tsld | 260℃ for 5 Seconds |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Flux * | Φ | White | 24.0 | 28.0 | --- | lm | IF=60mA |
| Luminous Flux * | Φ | White | 24.5 | 28.5 | --- | lm | IF=60mA |
| Viewing Angle * | 2θ1/2 | W&WW | --- | 120 | --- | Deg | IF=60mA |
| Color Temperature | Tc | White | 3500 | 4000 | 4500 | k | IF=60mA |
| Color Temperature | Tc | Warm White | 6000 | 6500 | 7000 | k | IF=60mA |
| Forward Voltage | VF | White | 3.00 | 3.30 | 3.80 | V | IF=60mA |
| Forward Voltage | VF | Warm White | 3.00 | 3.30 | 3.80 | V | IF=60mA |
| Reverse Current | IR | W&WW | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- It use many parameters that correspond to the CIE 1931 2°. X, Y, and Z are CIE 1931 2° values of Red, Green and Blue content of the measurement.
CIE Chromaticity Diagram:
Reliability Test Items And Conditions (Per Chip):
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
| No. | Test Item | Test Hours/Cycles | Test Conditions | Sample Size | Ac/Re |
| 1 | Resistance to Soldering Heat | 6 Min | Tsld=260±5℃, Min. 5sec | 25pcs | 0/1 |
| 2 | Thermal Shock | 300 Cycles | H: +100℃ 5min ∫ 10 sec L: -10℃ 5min | 25pcs | 0/1 |
| 3 | Temperature Cycle | 300 Cycles | H: +100℃ 15min ∫ 5min L: -40℃ 15min | 25pcs | 0/1 |
| 4 | High Temperature Storage | 1000Hrs. | Temp: 100℃ | 25pcs | 0/1 |
| 5 | DC Operating Life | 1000Hrs. | IF=20mA | 25pcs | 0/1 |
| 6 | Low Temperature Storage | 1000Hrs. | Temp: -40℃ | 25pcs | 0/1 |
| 7 | High Temperature/ High Humidity | 1000Hrs. | 85℃/85%RH | 25pcs | 0/1 |
2) Criteria for Judging the Damage:
| Item | Symbol | Test Conditions | Criteria for Judgment |
| Min | Max |
| Forward Voltage | VF | IF=20mA | --- | F.V.*)×1.1 |
| Reverse Current | IR | VR=5V | --- | F.V.*)×2.0 |
| Luminous Intensity | IV | IF=20mA | F.V.*)×0.7 | --- |
*) F.V.: First Value.
Reel Dimensions:
Carrier Tape Dimensions:
Loaded quantity 1000PCS per reel.
For more details, please contact us.
Email:Facebook@doublelight.com.cn
